Thermax® N990 replaced N330 in a Butyl tire curing bladder compound leading to improved processing properties and an increase in thermal conductivity.
Continue readingButyl Tire Curing Bladder
SBR Tire Bead Insulation
Thermax® N990 replaced N660 in an SBR tire bead insulation compound resulting in improved processing, dynamic, and adhesion properties.
Continue readingACM Automotive Hose
Thermax® N990 replaced N550 in an ACM automotive hose compound leading to improvements in processing and aging properties.
Continue readingNBR Fuel Hose
Thermax® N990 replaced N650 in an NBR fuel hose compound resulting in improvements in heat, oil, and fuel aging properties.
Continue readingNR Automotive Bushings
Thermax® N990 replaced N660 in a NR automotive bushing compound resulting in increased rebound, decreased tan δ, and lower dynamic to static spring rate ratio.
Continue readingMillathane
Thermax® N990 was tested in a millable polyurethane compound. Utilizing N990 in place of highly reinforcing fillers resulted in lower viscosity, lower compression set, and higher resilience.
Continue readingFKM Automotive Gaskets and Seals
Thermax® N990 replaced N774 in an FKM seal compound resulting in reduced viscosity, lower cost, and equal or better sealing.
Continue readingEPDM Engine Mount
Thermax® N990 replaces N550 in an EPDM engine mount compound resulting in reduced viscosity and increased metal adhesion.
Continue readingHNBR Automotive Hose
Thermax® N990 replaces N762 in an HNBR automotive hose compound resulting in decreased compression set and improvements in heat and fluid aging properties.
Continue readingSilicone Platinum Cure Systems
Thermax® N990 is added as a pigment to platinum cured silicone without negatively impacting the vulcanization.
Continue reading